The following chart is based on 14″ (355.6mm) deep drawers. For other depths (in 2″ increments) add 2″ or 50.8mm to the depth.
Note: These sizes can vary slightly
| Width | Size In | Size mm |
|---|---|---|
|
18″ Wide x 14″ Deep |
16.375 W x 12.75 D |
415.9 W x 323.8 D |
|
24″ Wide x 14″ Deep |
22.375 W x 12.75 D |
568.3 W x 323.8 D |
|
30″ Wide x 14″ Deep |
28.375 W x 12.75 D |
720.7 W x 323.8 D |
|
36″ Wide x 14″ Deep |
34.375 W x 12.75 D |
873.1 W x 323.8 D |
This measurement is inside the box from the bottom to the top of the drawer face. The height inside the box for the sides is also indicated.
| Endura Box | Drawer Face (DF) | Top of Face | Top of Side |
|---|---|---|---|
|
Small |
* Extra Small |
2.220 |
2.129 |
|
Small |
Small |
3.480 |
2.129 |
|
Small or Medium |
Small Medium |
4.740 |
2.129 or 3.625 |
|
Medium |
Medium |
6.000 |
3.625 |
|
Medium or Large |
Medium Large |
7.260 |
3.625 or 5.436 |
|
Large |
Large |
8.519 |
5.436 |
|
Extra Large |
Extra Large |
9.779 |
8.034 |
This measurement is inside the box from the bottom to the top of the drawer face. The height inside the box for the sides is also indicated.
| Endura Box | Drawer Face (DF) | Top of Face | Top of Side |
|---|---|---|---|
|
Small |
* Extra Small |
56.4 |
54.1 |
|
Small |
Small |
88.4 |
54.1 |
|
Small or Medium |
Small Medium |
120.4 |
54.1 or 92.1 |
|
Medium |
Medium |
152.4 |
92.1 |
|
Medium or Large |
Medium Large |
184.4 |
92.1 or 138.1 |
|
Large |
Large |
216.4 |
138.1 |
|
Extra Large |
Extra Large |
248.4 |
204.1 |
The following chart is based on 14″ (355.6mm) deep drawers. For other depths (in 2″ increments) add 2″ or 50.8mm to the depth.
Note: These sizes can vary slightly
| Width | Size In | Size mm |
|---|---|---|
|
18″ Wide x 14″ Deep |
15.402 W x 12.244 D |
391.2 W x 311 D |
|
24″ Wide x 14″ Deep |
21.402 W x 12.244 D |
543.6 W x 311 D |
|
30″ Wide x 14″ Deep |
27.421 W x 12.244 D |
696.5 W x 311 D |
|
36″ Wide x 14″ Deep |
33.402 W x 12.244 D |
848.4 W x 311 D |
The table below show measurements in millimeters (mm) only. Divide millimeters by 25.4 to get inches.
This measurement is inside the box from the bottom to the top of the drawer face. The height inside the box for the sides is also indicated.
**All drawer box sides are 6mm higher than the box front height that is indicated. In other words, the box front is 6mm lower than the sides. Also, if you want the full height, add an additional 12.7mm for the 1/2″ plant-on bottom. (Example: Total drawer box height in the font without a face is 66 + 12.7 = 78.7mm for an Extra Small drawer box).
| Drawer Face (DF) | Box Front Height ** | Top of Face | Top of Side |
|---|---|---|---|
|
Extra Small |
66 |
85 |
40 |
|
Small |
94 |
117 |
68 |
|
Small Medium |
114 |
149 |
88 |
|
Medium |
134 |
181 |
108 |
|
Medium Large |
174 |
213 |
148 |
|
Large |
214 |
245 |
188 |
|
Extra Large |
254 |
277 |
228 |
